When Two Become One
Thermally modified American ash underpins a different approach to a dual lot development in Melbourne.
Elsternwick, an affluent suburb just 9kms from
Melbourne’s CBD, is known for its tree lined streets and range of architectural
styles. It’s in this sought after area that property developer Elad Zohar
acquired a large lot on which to build two stunning homes – one for his own
growing family.
Both owner and architects, ADDARC, were keen not to tread the usual pathway of dual lot developments, common to the Asia Pacific region, which result in houses that are carbon copies of one another. “We wanted to give this development a unique identity” says ADDARC’s Rohan Appel who led the project. “Whilst two homes, we wanted it to read as a singular composition”.
A key to achieving this was clever selection
and arrangement of materials with elements running across the two properties
and extending from external to internal spaces giving a sense of cohesion and
flow.
“We chose a monochromatic palette which
included Danish Petersen Bricks in a light grey hue which are elevated and then
looked to contrast that against a deeper, darker tone to anchor the lower
ground floor and set a backdrop for the richness of landscaping” says Appel.
Seeking the appropriate solution ADDARC wanted
a natural material that would be robust enough for a growing family, yet
timeless in aesthetic and so they turned to timber. Having explored several
options, thermally modified American ash was chosen with the guidance of expert
importers, Britton Timbers. “Having initially considered charred timber we were
introduced to the benefits of thermally modified ash and were completely sold
because of the beautiful grain. It was different from other finishes including
charred and stained options which tend to lose character in their processing”.
Thermally modified timber (TMT) is not a new
concept. More modern studies on possible benefits of TMT began in the 1930s and
’40s in Europe and the USA but the technology was not developed commercially.
It wasn’t until the late 1990s that Scandinavia first introduced the commercial
method of thermal modification that we recognise today, as a way of improving
the durability and stability of native softwoods. More recent experimental and
development work has shown that the thermal modification process works
extremely well with some North American hardwood species and commercial TMT
kilns were first introduced into North America in the mid 2000s.
The TMT process is essentially a high
intensity kiln schedule that lasts between 3 to 4 days. The temperature reaches
between 180 and 215 degrees Celsius depending on the level of durability
required. The process requires an inert atmosphere devoid of oxygen to prevent
combustion, this is usually either steam or a vacuum. During the process, the
chemical and physical properties of the timber undergo permanent change.
The two most beneficial effects of the TMT
process are to dramatically improve the stability and the durability of timber
species. After the process, the moisture content is lowered to around 4–6% and
the equilibrium moisture content is permanently reduced which means that
thermally modified timber is less affected by atmospheric changes in humidity,
reducing the ability of the timber to absorb moisture, and so greatly improving
its stability. The durability is improved by removing the hemicelluloses
and carbohydrates from the wood which are the main food sources for
wood-destroying fungi.
Other benefits include a reduction in thermal
conductivity by around 20–25% compared to its untreated state, a significant
benefit when used in outdoor applications. It also appears to improve the
surface hardness of some species although more research is needed to fully
quantify which species and by how much. The other characteristic of TMT is
a change in appearance leading to rich and dark colour tones. Whilst in this
project a further stain was applied for an even darker finish, frequently TMT in
external applications is left in its natural state.
“Enduring design and sustainability were key
drivers, but as with every development project there are certain choices that
need to be balanced” says Appel. “For this project the decision was obvious as
the timber selection was an environmentally
responsible choice but one that delivered the desired aesthetic outcome”.
“The arrival experience into the house was
important to us” he continues. “We wrapped the thermally modified ash around
the garage and then adapted with a subtly different finish that highlighted the
grain and texture for the internal entry corridor”. The result is an extension
of materiality from outside to in. The continuous vertical cladding renders the
garage almost invisible from the outside and permits a seamless, consistent
visual when viewed from the road which reads as a singular residence and settles
into the environment as if it has always been there. (WNID)
Komentar
Posting Komentar